From:jean michel DEHERLY e-mail:jeanmicheldeherly@orange.fr
Subject:installing reverse gear on a de luxe Date:Tue Jan 19 00:14:46 2021
Response to:7501

Hello Rick
thank you for your reply , could you send me a picture of the different pieces even
if they are worn out to have an exemple ?
----- ORIGINAL MESSAGE FOLLOWS -----


----- ORIGINAL MESSAGE FOLLOWS -----
sorry I mean reverse gear ...

----- ORIGINAL MESSAGE FOLLOWS -----
Hello everybody , I appreciate your help for the best way
to install a rear gear on a
de luxe as I want to fit a side car on mine when finished
to restore . Thank you

Iím going through the gearbox process now. Iím not sure
how much of required parts are in the standard gearbox.
There are the gears themselves. The shift rod has extra
grooves for the fork detent which may not be there. There
is also a shaft for the idler gear, the fork, pivot and
lever. I suppose you could get by without the control
lever at the tank but to do it correctly youíll need
that with the linkage rod and reverse shift plate.
Hopefully your crankcases have the castings inside and
appropriate holes in the right places. If not it will
need to go up on the mill for some work. I am looking for
reverse gears as the existing ones are pitting and worn.

Rick

Sent from IP Address: 90.105.20.115
Lookup 90.105.20.115