From:Indnrdr e-mail:indnrdr@yahoo.com
Subject:RE: RE: RE: RE: RE: deluxe clutch plates Date:Tue Jul 7 16:29:52 2015
Response to:5853
I had Rob Olson's Kelvar plates put in during the summer of 2007. There are lots of times the K.J. just sits. But I've never experienced the plates sticking together when I fire it back up. I use straight 50wt oil and the clutch works perfectly all the time.

----- ORIGINAL MESSAGE FOLLOWS -----
I have in my henderson what are supposed to be
kevlar clutch plates but after sitting for a
short period of time they tend to stick
together and I then have to start bike in gear
and engauge the clutch and rear brake to get
the plates free. Does anyone else have this
problem with the kevlar plates?

----- ORIGINAL MESSAGE FOLLOWS -----
Hi Mike,
I have 20,000 miles on my king clutch in my
'28. I found they work very well. I just looked
it over lately. It has very little wear so it
went back in.

----- ORIGINAL MESSAGE FOLLOWS -----
I have some shocking news for you mike.
These are metal on metal plates.
Also, be cautious about just popping out new
ones.
Half of the plates have a warp to them which
allows for the clutch to easily release in the
oil bath.
If you want to improve, I suggest purchasing a
King Clutch.
New plates with, I believe, Kevlar linings.
I have one in my KJ. Very smooth.
:John

----- ORIGINAL MESSAGE FOLLOWS -----


----- ORIGINAL MESSAGE FOLLOWS -----
can anyone show me in detail how the clutch
plates are properly installed . i have
(9)plates but none have lining on them and need
to know which ones have to be relined.all were
in a box when i received this hen. none even
show where lining was installed as they are
scorched and i was going to laser new ones and
have them relined.thanks.