My forks are true and I have the hub assembly spaced to the
left as far as it can go. Any further and the brake drum
will rub on one of the rocker studs.
I'M AT A LOSS!!

----- ORIGINAL MESSAGE FOLLOWS -----
  For what ever its worth, if it is not a show bike just
make some axle spacers to locate your wheel central
otherwise I believe the spokes should be adjusted to bring
the rim in central.

  I laced my wheel central relative to the hub and it is
okay however, if your forks are bent they will skew the
wheel location.

----- ORIGINAL MESSAGE FOLLOWS -----
All:
  I've run into a delema in fitting the front wheel on my
1929 KJ. I had the wheel laced up true to the hub center
however when I fit the wheel into the fork assemblies the
rim is 1/4 to 5/16" off center to the left. Is this normal
or do I need to reset the spokes so the rim has an offset. I
ve asked some people and have gotten conflicting answers.
  Any help would be greatly appreciated.
                      thanks: John